Product Features
- Charge Neutral - Insensitive to water chemistry variations and dissolved solids
- Wide pH Range - Effective from acidic to alkaline conditions (pH 5-10)
- High Salinity Tolerance - Performs well in saline and brackish waters
- Stable Performance - Consistent results across varying water conditions
- Low Dosage - Cost-effective at 0.5-5 ppm depending on application
Applications
Variable Water Quality
Sites with fluctuating water chemistry
High Salinity
Saline and brackish water applications
Mineral Slurries
Ore slurry flocculation and settling
Specialty Applications
Unique flocculation requirements
Product Specifications
| Test Item | Specification |
|---|---|
| Product Name | Nonionic Polyacrylamide (Nonionic PAM) |
| Type | Nonionic polyacrylamide homopolymer |
| Appearance | White or light yellow powder/granule |
| Molecular Weight | 6-15 million (various grades) |
| Hydrolysis Degree | <5% (nonionic) |
| Solubility | Fully soluble in water within 45-90 minutes |
| pH Range | Effective from pH 5-10 |
| Packaging | 25kg bags, 500kg bags, or 1000kg jumbo bags |
| Shelf Life | 24 months in dry conditions |
Recommended Dosage
Mineral Processing: 0.5-5 ppm
Water Clarification: 0.5-3 ppm
Sludge Conditioning: 1-5 kg/ton dry solids
High Salinity Water: 1-10 ppm
* Optimal dosage determined by jar testing. Dosage depends on solids content and water chemistry.
Usage Instructions
Preparation: Prepare 0.1-0.5% solution by slowly adding powder to water with stirring
Mixing Time: Stir for 45-90 minutes until fully dissolved
Addition Point: Add to well-agitated slurry or wastewater stream
pH Range: Optimal performance at pH 6-9
* Use after preparation. Store in dry, cool place away from moisture.
Key Advantages
Charge Neutral
Insensitive to water chemistry
Wide pH Range
Effective from pH 5-10
Salinity Tolerant
Works in high TDS water
Stable
Consistent performance